burkert隔膜閥2031
實地控制的膈膜閥,攜帶油路分配器的缸筒驅使器裝制和由冷開裂不銹無縫管組成部分的閥體。PA 或 PPS 建材的驅使器裝制。burkert隔膜閥2031
2031 compact type
Www.burkert.com page. 1/3
• the fluid is separated from the actuator tightly
Diaphragm
• contaminated, sticky or dirty liquid
February 2 to the compact diaphragm valve,
Cast body, threaded
Connection, G, 1/4 - 3/4
External pilot diaphragm valve by
Pneumatic operated piston actuator
The diaphragm is made of a 2 way valve case
Investment casting stainless steel.
The standard material for actuators is Pennsylvania
Polyamide. With its good overflow characteristics,
The valve can achieve high overflow capacity
And various applications of pollution,
To achieve sticky or dirty Florida uid.
technical data
Port connection thread ISO 228, G 1/4 - 3/4
Orifi CE DN 15-20
Body material cast stainless steel 316 L / 1.4435
Actuator material PA polyamide
Pilot air inlet stainless steel 1.4305
Diaphragm material EPDM (AB), PTFE / EPDM (EA)
EPDM (AD), advanced PTFE / EPDM (EU) and fluorine rubber (FF)
According to requirements
Medium neutral gas and liquid; sterile aggressive or abrasive
UID, Florida
Viscosity up to viscosity
Medium temperature
Three yuan ethylene propylene (AB), polytetrafluoroethylene / EPDM (EA)
Three yuan ethylene propylene (AD), advanced PTFE /
EPDM (EU)
FKM (FF)
-10 to 130 DEG C (steam sterilization, 140, 60 minutes)
-5 to 143 DEG C (steam sterilization, 150, 60 minutes)
0 to + 130 degrees C (not recommended for steam)
The ambient temperature is -5 to +60 degrees C
Control medium; neutral gas; air
Installation, as required, preferably in the upright position of the actuator